Power Steering

So in my last post I touched on how I disturbed the power steering pipework and it’s sprung a leak.

I removed and cleaned up the offending rubber pipe, and it looks like it’s just flared a little at one end. Seems like an obvious thing to just replace.

Just need to work out what spec of hose to buy and where from…

Can reuse the original clips, they’re fine, and the procedure to refill the system doesn’t look too bad.

The manual I’m using, by the way, is this:

which as you can see is pretty well worn. But it’s brilliant. They bought a two year old car, disassembled it, then rebuilt it, and documented every step.